Washtech XP Service Manual

XP PASSTHROUGH DISHWASHER Service Manual

Dishwashing Procedures for best results Note: these are general instructions to assist in getting the best performance from Washtech dishwas

Dishwashing Procedures for best results Drying Single tank commercial dishwashers do not have a drying cycle. However, the machines do ri

Troubleshooting Chart PROBLEM POSSIBLE CAUSES REMEDY (Check/Adjust/Replace) Filling Not filling Water supply valve shut Water supply valve

Troubleshooting Chart PROBLEM POSSIBLE CAUSES REMEDY (Check/Adjust/Replace) Drainage Flooding Drain waste blocked Drain waste Leaks L

XP Operating Instructions Start up Fit drain upstand, wash pump filter, scrap tray and shut door. Turn wall power switch on and select any cycle (

Components WARNING All service/repair work must be carried out by qualified personnel only. Location and Access 1. Rinse Tank 2. Rinse Safety Th

Timer Part Number 32822 Function Provides an automatic timing sequence of the wash, rinse, detergent and rinse aid injection stages in a dishwashing

Rinse Thermostat Part Number 3020 Function Controls the rinse heating elements and prevents operation of machine if the rinse temperature is below th

Wash Thermostat Part Number 30201 Function Controls the wash element Description The wash thermostat is a single pole capillary type device. It

Solenoid Valve Part Number 3342 Function Controls flow of water into machine during filling of wash tank and final rinsing. Description Electromagne

WARNING Before installation and commissioning, you must read the safety instructions and warnings carefully and all the warning labels attached to

Pressure Switch Part Number 600 30308 Function Controls filling of wash tank and protects wash elements. Description The pressure switch is attached

Wash Pump Part Number 600 30299 Function Pumps water from the wash tank to the wash arms providing a recirculating wash cycle. Description Electric

Detergent Pump Part Number 600 30094 Function When fitted the pump automatically injects detergent into wash tank during filling of the machine and a

Rinse Aid Injector Part Number 600 30324 Function Adjustable flow rate hydraulic rinse pump for rinse-aid chemical dosingDescription The injector wo

PLAN A PERSPECTIVE VIEW Parts ListITEM PART NUMBER DESCRIPTION QTY1 32822 TIMER4907DV(180/6 SEC)3 CYCLE 123035SWITCH SINGLE POLE BIASED BLACK23 8816 M

EXPLODED VIEWParts ListQTYDESCRIPTIONPART NUMBERITEM1XP (3) CONTROL PANEL 208 2000611XP CONTROL LABEL208 7000122TEMP GAUGE RECTANGULAR 58x25600 900803

Service Manual XP-226Revision 1C

Service Manual XP-227Revision 1C

Service Manual XP-228Revision 1C

EXPLODED PERSPECTIVE VIEW A PERSPECTIVE VIEW B C FRONT VIEW AParts ListQTYDESCRIPTIONPART NUITEM1M2 (3) DOOR326 2002511M2(3) DOOR UPPER INFILL326 2002

Contents Safety Instructions ...

PERSPECTIVE VIEWINSIDE DOOR J BOLT ASSEMBLYParts ListQTYDESCRIPTIONPART NUMBERITEM1M2 (3) PASS-THROUGH DOOR ASSY326 1000713M5 x 12 SS TRUSS HEAD SCREW

PERSPECTIVE VIEW 326 1001116/09/20133-DM2 \ XP RACKSLIDE ASSYREVParts ListQTYDESCRIPTIONPART NUMBERITEM1M2(3) RACK SLIDE SUB ASSY MK2326 1001212M5 x 2

Service Manual XP-232Revision 1C

Service Manual XP-233Revision 1C

Spare Parts DESCRIPTION PART NO Cabinet & Door Control Panel 208 20006 Control Panel Label 208 70001 Door Switch Magnet 600 30182 Spring Doo

Spare Parts DESCRIPTION PART NO Pumps & Solenoids Detergent Pump 1.5 L/H 600 30094 Dual Check Valve Assembly 400 10132 Rinse Aid Injector

Service Manual XP-236Revision 1C

Service Manual XP-237Revision 1C

400 9014419/11/20131-GDRAIN PUMP KIT 0440031 - XP/AL3/AL8/PW1REVDRAIN PUMP KIT 0440031QTYDESCRIPTIONPART NUMBERITEM1SWITCH C/RINSE ROLD SPCO600 301021

Revisions Manual Revisions REVISION REVISION FROM CHANGE STATUS DATE SERIAL NO: DESCRIPTION 1A 10/08/13 133088 1B 19/11/13 add d

Safety Instructions WARNING Equipment contains dangerous voltages and can be hazardous if installed or operated incorrectly. Non-compliance with Warn

Information supplied in this manual is copyright. No part of this work may be reproduced or copie

Installation WARNING Installer must be suitably qualified and ensure compliance with all codes and standards including AS/NZS3500.1. Failure to com

Service Manual XP-26Revision 1C

Service Manual XP-27Revision 1C

Installation Checklist CHECK OK / NOTES Delivery Supplied complete no transit damage Position Level and stable on sound, waterpr

Maintenance Checklist CHECK OK / NOTES Installation – use Installation Checklist on previous page to check all services, operator training